SP5-xxx: Mode-3
G179 5-66 SM
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 External RCG not managed
-2394 Device not managed
-2395 Box ID for external RCG is illegal
-2396 Device ID for external RCG is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Inst Clear
209
Releases the machine from its embedded RCG setup.
Print CommLog
250
Prints the communication log.
5821* NRS Address
001 CSS PI Device Code
Sets the PI device code. After you change this
setting, you must turn the machine off and on.
002 RCG IP Address
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000h to FFFFFFFFh / - / 1]
NVRAM Upload
5824
Uploads the NVRAM data to an SD card. Push Execute.
Note: When uploading data in this SP mode, the front door must be open.
To Next Page
Loading...
