Ricoh G179 - Page 291

SP5-xxx: Mode-4
SM 5-75 G179
Service
Tables
Sets the vendor ID:
Initial Setting: 0x05A Ricoh Company
[0x0000 to 0xFFFF/1] (DFU)
Product ID
003
Sets the product ID.
[0x0000 to 0xFFFF/1] (DFU)
Device Release No.
004
Sets the device release number of the BCD (binary coded decimal) display.
[0000 to 9999/1] (DFU)
Enter as a decimal number. NCS converts the number to hexadecimal
number recognized as the BCD.
Delivery Server Setting
5845*
These are delivery server settings.
Retry Interval
003
Sets the time interval before the machine tries again when it goes back to
standby after an error occurs during an image transfer with the SMTP
server.
[60 to 900 / 300 / 1]
No. of Retries
004
Sets the number of times the machine tries again before it returns to standby
after an error occurs during an image transfer with the delivery or SMTP
server.
[0 to 99 / 3 / 1]
Instant Trans Off
[0 to 1 / 0 / -] 0: Disable, 1: Enable
022
Enables or disables the prevention function for the continuous data sending
error.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA