Ricoh G179 - Page 298

SP5-xxx: Mode-4
G179 5-82 SM
Specifies the decimal key number of the log to be written to the hard disk.
Save to SD Card
006
Specifies the decimal key number of the log to be written to the SD Card.
Copy HDD to SD Card
009
Takes the most recent 4 MB of the log written to the hard disk and copies
them to the SD Card.
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card.
Copy HDD to SD Card Latest
010
Takes the log of the specified key from the log on the hard disk and copies it
to the SD Card.
A unique file name is generated to avoid overwriting existing file names on
the SD Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can
be copied one by one to each SD Card. This SP does not execute if there is
no log on the HDD with no key specified.
Erase HDD Debug
011
Erases all debug logs on the HDD
Erase SD Debug
012
Erases all debug logs on the SD Card. If the card contains only debugging
files generated by an event specified by SP5858, the files are erased when
SP5857 010 or 011 is executed.
To enable this SP, the machine must be cycled off and on.
Dsply-SD Space
013
Displays the amount of space available on the SD card.
SD to SD Latest
014
Copies the last 4MB of the log (written directly to the card from shared
memory) onto an SD card.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA