SP5-xxx: Mode-4
SM 5-89 G179
Service
Tables
0: No authentication, No protection for logs
1: No authentication, Protected logs (only an administrator can see the logs)
Plug & Play/Setting Model Name
Selects the brand name and the production name for Windows Plug & Play.
This information is stored in the NVRAM. If the NVRAM is defective, these
names should be registered again.
After selecting, press the “Original Type” key and “#” key at the same time.
When the setting is completed, the beeper sounds five times.
5907
[0 to 23 / - / 1 step] FA
0: RICOH Aficio SP 8200 DN
1: SAVIN xxxxx
2: Gestetner MP xxxxx
3: LANIER MP xxxxx
4: NRG MP xxxxx
5: infotec MP xxxxx
5924* SDK Apli Display
SDK Apli Display
001
Enables or disables the LCD display of the SDK application.
[0 or 1 / 0 / 1/step]
0: Not display, 1: Display
5930 Meter charge
001
Enables or disables the Meter Charge mode. When enabling the Meter
Charge mode, the “Counter” menu is added to the user menu.
[0 or 1 / 0 / -]
0: OFF, 1: ON
5987* Count Falsific Prev
To Next Page
Loading...
