SP8-xxx: Data Log2-1
SM 5-113 G179
Service
Tables
5.18 SP8-XXX: DATA LOG2-1
Most of the SPs in this group are prefixed with a letter that indicates the mode of operation
(the mode of operation is referred to as an ‘application’). Before reading the Group 8
Service Table, make sure that you understand what these prefixes mean.
Prefixes What It Means
T: To t al : (Gr a nd Tota l) .
Grand total of the items counted for all applications
(C, F, P, etc.).
P: Print application.
Totals (pages, jobs, etc.) executed for each
application when the job was not stored on the
document server.
O:
Other applications
(external network
applications, for
example)
Refers to network applications such as Web Image
Monitor. Utilities developed with the SDK (Software
Development Kit) will also be counted with this
group in the future.
The Group 8 SP codes are limited to 17 characters, forced by the necessity of displaying
them on the small LCDs of printers and faxes that also use these SPs. Read over the list of
abbreviations below and refer to it again if you see the name of an SP that you do not
understand.
Key for Abbreviations
Abbreviation What It Means
/ “By”, e.g. “T:Jobs/Apl” = Total Jobs “by” Application
> More (2> “2 or more”, 4> “4 or more”
AddBook Address Book
Apl Application
B/W Black & White
Bk Black
To Next Page
Loading...
