SP8-xxx: Data Log2-1
G179 5-118 SM
O:FIN Jobs
[0 to 9999999 / 0 / 1]
8067
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
806x 1 Sort Number of jobs started in Sort mode.
806x 2 Stack Number of jobs started out of Sort mode.
806x 3 Staple Number of jobs started in Staple mode.
806x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
806x 5 Z-Fold
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
806x 6 Punch
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064 6.)
806x 7 Other Reserved. Not used.
To Next Page
Loading...
