SP8-xxx: Data Log2-2
G179 5-120 SM
8381 T:Total PrtPGS
8384 P:Total PrtPGS
8387 O:Total PrtPGS
These SPs count the number of pages printed by
the customer. The counter for the application used
for storing the pages increments.
[0 to 9999999 / 0 / 1]
When the A3/DLT double count function is switched on with SP5104, 1 A3/DLT page is
counted as 2.
When several documents are merged for a print job, the number of pages stored are
counted for the application that stored them.
These counters are used primarily to calculate charges on use of the machine, so the
following pages are not counted as printed pages:
> Blank pages in a duplex printing job.
> Reports printed to confirm counts.
> All reports done in the service mode (service summaries, engine maintenance
reports, etc.)
> Test prints for machine image adjustment.
> Error notification reports.
> Partially printed pages as the result of a printer jam.
LSize PrtPGS
[0 to 9999999 / 0 / 1]
8391
These SPs count pages printed on paper sizes A3/DLT and larger.
Note: In addition to being displayed in the SMC Report, these counters are
also displayed in the User Tools display on the machine.
8411 Prints/Duplex
This SP counts the amount of paper (front/back
counted as 1 page) used for duplex printing. Last pages
printed only on one side are not counted.
[0 to 9999999 / 0 / 1]
T:PrtPGS/Dup Comb
[0 to 9999999 / 0 / 1]
8421
These SPs count by binding and combine, and n-Up settings the number of
pages processed for printing. This is the total for all applications.
To Next Page
Loading...
