Board Structure
G179 6-8 SM
service slot for firmware version updates, moving. applications to other SD cards, and
downloading/uploading NVRAM contents
Board Option Slot. Only one of the following options can be installed in either I/F Slot:
IEEE1284 Interface Board (Centronics), IEEE802.11a/g, g (Wireless LAN) or Gigabit
Ethernet.
Flash ROM. Stores the program. Maximum capacity: 128 MB.
USB. The interface for USB 2.0 devices. Supports both low-speed and high-speed
modes. USB support is built-into the controller. No installation is required for the USB
function.
NIB. The Ethernet interface connection. Network support is built-into the controller. No
installation is required for the network function.
EEPROM. Stores the data for the SP code settings.
NVRAM. The memory that stores the system configuration and other information.
HDD: A 2.5" HDD (more than 60 GB) can be connected using an S-ATA I/F.
To Next Page
Loading...
