Bridge Unit (D386)
SM 1-15 G179
Installation
6. Attach the two guides [5] to the cutouts in the paper exit.
1) Place the lower hook of the guide in the cutout of the paper exit.
2) Attach the guide as shown until the two side hooks hold the paper exit.
3) Press the guide.
4) Press down the guide as shown.
7. Install the bridge unit [6].
8. Open the bridge unit cover [7]
9. Secure it with the knob screw [8] and long knob screw [9].
10. Close the bridge unit cover [7].
11. Reassemble the machine.
To Next Page
Loading...
