3000-Sheet Finisher (B805)
G179 1-20 SM
6. Attach the rear joint bracket [4] ( x 2; M4 x 14).
7. Attach the front joint bracket [5] and the holder bracket [6] ( x 2; M4 x 14).
Holder bracket [6] must be placed outside the front joint bracket [5]. This
bracket is provided with the Bridge Unit (D386).
8. Pull the lock lever [7] ( x 1).
9. Slowly push the finisher to the left side of the machine, keeping its front door open until
the brackets [4] [5] go into their slots.
10. Push the lock lever [7], and then secure it ( x 1).
11. Close the front door of the finisher.
12. Connect the finisher connector [8] to the machine.
To Next Page
Loading...
