Output Jogger Unit (B703)
G179 1-28 SM
3. Use the flat head of a screwdriver to remove the left upper cover [1].
4. Remove the cover plate [2] ( x 2). Keep the screws.
5. While holding the jogger unit with the connector on the left, put the hooks on the frame
of the jogger unit [3] into the holes in the left and right side of the finisher frame.
6. Connect connector [4] to the socket ( x 1).
7. Attach the jogger unit [5] to the finisher ( x 2).
8. Reattach the jogger unit cover [6] to the jogger unit ( x 2).
To Next Page
Loading...
