4.Software Configuration
Bit 7 = 1
As Bit 1 = 1 is the most restrictive of the three, it will take presedence over the other two and only administrators
will be able to access the DS via WIM.
ï‚· In order for SP5-885-020 to have any effect, the Document Server must be enabled (SP5-
967-001=0). For information about SP5-967-001, refer to Disabling the Document Server using System
SP5-967-001.
ï‚· Access to the entire "Job" menu can be restricted using SP 5-888-001. For details, refer to Use of SP 5-
888-001 to restrict access to the "Job" menu on WIM.
User Authentication for Specific MFP Applications
The SP5-420 settings enable/disable User Authentication for specific MFP applications.
SP 5-420 User Authentication Value (Default: 0)
SP 5-420 User Authentication Value (Default: 0)
SP5-420-001 Copy 0 (ON) 1 (OFF)
SP5-420-011 Document Server
SP5-420-021 Fax
SP5-420-031 Scanner
SP5-420-041 Printer
1. Enable User Authentication for the device as a whole:
User Tools > System Settings > Administrator Tools > User Authentication Management
2. Use the SP5-420 settings to specify the applications to which User authentication is to apply.
397
Rev. 02/01/2017
To Next Page
Loading...
Need help?
General
