Controller Options
167
9. Input [IP Address], [Subnet Mask] and [Default Gateway].
10. Set other items if necessary.
11. Press [Set].
12. Close the web browser.
13. Disconnect the Ethernet cable from the PC.
14. Connect the Ethernet cable to a network device (e.g. switching hub).
15. Set the IP address of this option in the printer driver which you use.
Extended USB Board Type M19 (D3BS-01)
• Turn OFF the main power and unplug the power cord from the wall socket. If installing without
turning OFF the main power, an electric shock or a malfunction may occur.
You can only install one of the following network interfaces at a time:
• File Format Converter
• IEEE 1284 Interface Board
• IEEE 802.11a/g/n Interface Unit
• USB Device Server Option
• Extended USB Board
1. Remove the slot cover [A].
To Next Page
Loading...
