Anti-condensation Heater (for Mainframe Paper Tray)
86
Anti-condensation Heater (for Mainframe Paper Tray)
Accessory Check
No. Items Q’ty Remarks See Note *2
1 Screw M4 x 6 2 A: Heater Kit
2 Harness 1
3 Heater 1
4 Harness 1 *1 B: Harness
5 Clamps 5 A: Heater Kit
6 Bracket 1 C: Bracket Set
7 Bracket 1
8 Bracket 1
9 Locating pin (Long) 1 E: Pin Set
10 Locating pin (Short) 1
11 Base 1 D: Base Set
• *1 This harness (P/N: D1955265) is also used as a harness for Anti-condensation Heater for optional
paper feed unit, and Anti-condensation Heater for mainframe. If you have already ordered this harness
for these heaters, it is not necessary to order this harness again at this time.
• *2 All the accessories required to install the anti-condensation heater for mainframe paper tray are
available as the following kits or components. Order these separately from the heater:
A: Heater Kit (D5730400 for NA/TWN, D5730401 for EU/AA/CHN)
B: Harness (D1965265)
C: Bracket Set (D1965093)
D: Base Set (D1965098)
E: Pin Set (D1965092)
• These part numbers are correct as of November, 2016. Refer to the “Option” section in the
mainframe’s parts catalog to check the latest part numbers.
To Next Page
Loading...
Need help?
General
