Ricoh MP C407

3.SP Mode Tables
365
Scanner Service Mode
SP1-XXX (System and Others)
1001 [Scan Nv Version]
1-001-
005
- *CTL -
Operates automatic initialization to ensure that scanner NV is initialized if necessary. To do this SP,
specify the version of scanner NV within 9 characters.
“Function name”_”Machine code”_”Serial number”
- Function name: Enter “3”.
- Machine code: Enter the machine code with three characters.
- Serial number: Enter the number (default: 001).
1005 [Erase margin(Remote scan)]
1-005-
001
Range from 0 to 5 mm *CTL
[0 to 5 / 0 / 1 mm/step]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This SP is activated only when
the machine uses TWAIN scanning.
1009 [Remote scan disable]
1-009-001 0:enable 1:desable *CTL
[0 or 1 / 0 / - /step]
Enable or disable remote scan.
1010 [Non Display ClearLight PDF]
1-010-001 0:Display 1:Nondisplay *CTL
[0 or 1 / 0 / - /step]
Display or nondislay ClearLight PDF function.
1011 [Org Count Disp]
1-011-001 0:ON 1:OFF *CTL
[0 or 1 / 0 / - /step]
Display or nondislay original counter.
0: Displays remaining memory.
1: Displays original counter.
1012 [UserInfo Release]
1-012-001 0:No 1:Yes *CTL
[0 or 1 / 1 / - /step]
Set if the following user information is released or not.
- Destination of the mail, folder, CS
- Sender
- Message