Anti-condensation Heater (Optional Paper Feed Unit)
103
4. Join the two paper feed units with two joint brackets (rear) [A] and one screw [B]. (M3×6: × 3
(included in this kit))
1: Rear
2: Front center
5. Reassemble the mainframe and the paper feed units.
• Do not lift the machine together with one or more paper feed unit(s):
If there is already a machine with one or more optional paper feed unit(s), be sure to disconnect
the machine and paper feed unit(s), and lift them up separately when moving/transporting.
Otherwise, the handle of the paper feed unit will break due to the mainframe’s weight, and it can
cause an injury.
• When installing the mainframe with two paper feed units, join the two paper feed units first, and
then join the mainframe with the paper feed units.
To Next Page
Loading...
