4.Service Tables
118
1: On
3 Not used Do not change these settings.
4 Line resolution of e-mail
attachment: 400 x 400
0: Off
1: On
Sets the line resolution of the e-mail attachment as 400 x 400.
5-
6
Not used
Do not change these settings.
7 Designates the bits to reference for
original size of e-mail attachments
0: Registered (Bit 0 to 6)
1: No registration.
The "0" selection (default) references the settings for Bits 00, 01,
02, 04 above. The "1" selection ignores the selections of Bits 00,
01, 02, 04.
Switch 03 - Not used (do not change the settings)
Switch 04
No FUNCTION COMMENTS
0 Full mode address
selection
0: Full mode address
1: No full mode
(simple mode)
If the other ends have the addresses, which have the full mode function flag
("0"), this machine determines them as full mode standard machines.
• This machine attaches the "demand of reception confirmation" to a message
when transmitting.
• This machine updates the reception capability to the address book when
receiving.
1-
7
Not used
Do not change these settings.
Switch 05
No FUNCTION COMMENTS
0 Directr transmission selection to SMTP
server
0: ON
1: OFF
Allows or does not allow the direct transmission to SMTP
server.
1-
7
Not used Do not change these settings.
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)