Mainframe Installation
25
No. Description Remark Q’ty
NA EU AA TWN
- Notes For Users For printing with AirPrint 1 - 1 1
- For Users of This Product Before using the wireless
function
1 - 1 -
- Manual: Read This First 1 - 1 1
- Manual: Start Guide 1 - 1 -
• An NFC tag is required for connecting this machine to an Android smart device that has the Ricoh
Smart Device Connector application installed. Give this NFC tag to the customer so that they can
attach it to the machine. Where the tag should be attached and how to set it up for using the
smart-device application are described in the help guide within the application. The setup procedure
should be performed by the customer.
For D298/D299
Check the quantity and condition of these accessories.
Component List
No. Description Remark Q’ty
EU AA CHN
1 NFC Tag To be attached to the device. 1 1 1
2 Decal – Bluetooth 1 1 1
3 Decal – Emblem For the front cover and operation 2 2 -