Firmware Update (SD Card)
354
Code Contents Solutions
The wrong card version is downloaded. version in the SD card.
34 Destination error.
A card for the wrong destination is inserted.
• Install the correct ROM update data for each
destination (JPN/ EXP/ OEM) in the SD card.
35 Model error.
A card for the wrong model is inserted.
• Install the correct ROM update data for each
model in the SD card.
36 Module error.
The program to be downloaded does not exist on
the main unit.
The download destination specified by the card
does not match up to the destination for the main
unit’s program.
• Install the program to be updated in advance.
• There is a possibility that the SD card containing
the program to be updated has not been mounted.
Check to confirm that the SD card has been
correctly mounted.
• The SD card is incorrect if the program to be
updated has been correctly installed. In this case,
insert the correct SD card.
38 The version of the downloaded program has not
been authorized for the update.
• Make sure that the program to be overwritten is
the specified version.
40 Engine download fails.
• Switch the main power supply off and on to try
again.
• If the download fails again, replace the controller
board and the BiCU.
41 Fax download fails.
• Switch the main power supply off and on to try
again.
• If the download fails again, replace the controller
board and the FCU board.
42 Control panel / language download fails.
• Switch the main power supply off and on to try
again.
• If the download fails again, replace the controller
board and the operation panel unit.
43 Printing download fails.
• Switch the main power supply off and on to try
again.
•
The SD card media is damaged if the update fails
again. Replace the SD card media.
44 The data to be overwritten cannot be accessed
when controller-related programs are
downloaded.
• Switch the main power supply off and on to try
again.
• Install the correct ROM update data in the SD
card.
• Replace the controller board if the data to be
overwritten is contained on the controller board.
49 Firmware updates are currently prohibited.
• The setting of Update Firmware in the
To Next Page
Loading...
