Firmware Update (SD Card)
357
Code Contents Solutions
remote firmware update from the network.
70 Package firmware download from the network
fails.
• Check that the network is connected correctly.
71 Network communication error occurs at the
reserved date/time of the package firmware
update from the network.
• Check that the network is connected correctly.
72 The setting of @Remote is invalid at the
reserved date/time of the package firmware
update from the network.
• Set the setting of @Remote Service in the
Administrator Tools to [Do not Prohibit].
• The PDF firmware installed as standard contains a program required to print PS3 data as default.
However, this PS3 program is normally disabled.
• The PS3 firmware is a dongle (key) which enables PS3 data printing functions. When the PS3
firmware is installed, the PS3 program in the PDF firmware is enabled. Due to this specification, the
self-diagnosis result report shows the ROM part number/software version of the PDF firmware
contained in the PS3 program.
To Next Page
Loading...
