Firmware Update (Smart Firmware Update)
367
4. Touch [Execute Update].
5. Check the version of the received package firmware, and then touch [YES].
• Update is started.
• If the version of the reserved package in the HDD is older than the latest version, the messages
shown in the following picture are displayed.
• If you wish to download the latest version, touch [Execute] beside the message “Download and
update the latest package.” Then update of the package firmware will be started.
• If you wish to update using the firmware in the HDD (old version), touch [Execute] beside the
message “Update to the received package.”
6. [Update done] message is displayed.
To Next Page
Loading...
