UP/SP Data Import/Export
400
Import device information saved on an SD card.
1. Insert an SD card into the media slot on the side of the control panel.
2. Log in from the control panel as an administrator with all privileges.
3. [User Tools] icon > [Machine Features] > [System Settings].
4. Press [Administrator Tools].
5. Press [Device Setting Information: Import (Memry Strge Devc)].
6. Configure the import conditions.
• Press [Select] of the "Device Setting Info. File" to select the file(s) to import.
• When inserting a file into a home screen, press [Select] for the Image for Home screen and select the
file. You cannot use this setting when using the Smart Operation Panel.
• Specify whether to [Include] or [Exclude] the "Device Unique Information". "Device Unique
Information" includes the IP address, host name, fax number, etc.
• Enter the encryption key that was specified when the file was exported.
7. Press [Run Import].
8. Press [OK].
9. Press [Exit].
The machine restarts.
• If data export fails, the details of the error can be viewed in the log.
SP Data Import/Export
Data that can be Imported and Exported
• System SP
• Printer SP
• Fax SP
• Scanner SP
Exporting Device Information
When exporting SP device information from the control panel, the data is saved on an SD card.
To Next Page
Loading...
