SC2xx: Exposure
427
2. Check the harness and connector for ID sensor.
3. Replace the ID sensor.
4. Replace the BiCU.
Countermeasure (5): ID Sensor Shutter Defective
Check if there is no problem concerning the mechanism (interference or deformation).
1. Execute SP5-804-021 (OUTPUT Check: TM sensor Shutter Solenoid) to operate the ID sensor shutter
solenoid to check opening/closing of the shutter.
2. Check for a broken harness or connector disconnection.
3. If the problem cannot be solved, replace the BiCU.
To Next Page
Loading...
