Energy Save
595
The machine requires roughly the same time as warm-up time to recover from Fusing Unit Off mode.
Default: [Off]
If [Fusing Unit Off Mode (Energy Saving) On/Off] is set to [On], you can specify when to exit Fusing Unit Off
mode and the time to elapse before entering Fusing Unit Off mode.
If [Exit Fusing Unit Off Mode] is set to [On Printing], the machine exits Fusing Unit Off mode when printing is
performed.
If [Exit Fusing Unit Off Mode] is set to [On Operating Control Panel], the machine exits Fusing Unit Off mode
when a key other than the copy function key is pressed on the control panel of the machine.
Energy Saving Recvry. for Business Applicatn.
User Tools (Machine Features > System Settings > General Features)
Specify whether or not to enable low-energy recovery from Sleep mode to use applications independent of the
machine, such as Address Book Management or Browser.
Default: [Off]
If [On (Energy Saving)] is selected, it takes longer than usual to be ready to use the machine.
Recovery Time/Reduced Electrical Consumption
Reduced electrical consumption in Sleep mode*1:
MP C307 MP C407
NA/EU/AA: 1.0 W or less NA/EU/AA: 1.0 W or less
Recovery time from Sleep mode*1
MP C307 MP C407
10 sec. 10 sec.
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
To Next Page
Loading...
Need help?
General
