1-Bin Tray BN1030 (D574-58)
69
4. Attach the mounting frame [A]. (M3×10: × 8)
• Install the screws in this order: .
5. Route the USB cable [A] on the mounting frame and fasten with the two clamps.
6. Attach the 1-bin tray unit [A]. (M3x10: 4 screw, and blue screw [D])
Fasten the grounding wire [B] included in this kit with one screw as shown below. Fasten the other end of
the grounding wire with the screw [C].
To Next Page
Loading...
