Ricoh Pro C5310S - Copying Onto Envelopes from the Paper Tray or the Wide LCT

3. Select [Paper Size].
4. Specify the envelope size, and then press [OK] twice.
5. Press [Paper Type].
6. Press [Envelope].
Press [
Previous] or [ Next] to switch the screen to be displayed.
7. Press [OK] twice.
8. Place the originals, and then press [Start].
• For details about using envelopes, see page 107 "Copying onto Envelopes".
Copying onto envelopes from the paper tray or the wide LCT
Before using this function, specify the paper size and type in [Tray Paper Settings]. For the paper type,
select [Envelope]. For details, see page 316 "Changing Tray Paper Settings".
1. Select the paper tray where the envelopes are loaded.
2. Place the originals, and then press [Start].
• For details about using envelopes, see page 107 "Copying onto Envelopes".
2. Copy
108