The list of custom paper whose configurations are similar to those of the scanned paper
appears.
5. Select the custom paper you want to use, and then press [OK].
The custom papers that can be used in the selected tray appear.
Press [ Previous] or [ Next] to scroll through the list to find a paper that you want to select.
After selecting a custom paper, you can check its type and color by pressing Check Settings.
6. Press [Home] ( ) to close the [Tray Paper Settings] screen.
• If you want to change the custom paper settings, press [Change Custom Paper Sett.] in Step 3.
Modifying a Custom Paper
Before modifying a custom paper, confirm that no one is modifying it on Web Image Monitor or on the
color controller.
You can only change the [Custom Paper Name], [Paper Size], [Apply Duplex], [Apply Auto Paper
Select] and [Registration No.] settings for a custom paper that is registered from the master library.
1. Press [Tray Paper Settings] on the Home screen.
2. Press [Edit Custom Paper].
3. Select the custom paper whose settings you want to modify.
Press [
Previous] or [ Next] to scroll through the list to find the paper that you want to modify.
Registering Custom Paper
305
To Next Page
Loading...
