Message Cause Solution and reference
"Z-fold error." A setting in which Z-
fold cannot be
performed was
specified, and the
Z-fold function was
canceled.
Check the tray, paper orientation and print data
orientation settings, and the specified position for
postprocessing.
"The specified folder
in Document Server
is locked. Cannot
store."
The specified folder
is locked.
Unlock the folder or specify another folder number that
can be used.
Messages that Appear with Error Codes
Check the system configuration list or print settings list. The details of the error may also be printed in the
list.
See "Settings for Administrator", User Guide.
Message Cause Solution and reference
"84: Error" The amount of available
work area is insufficient for
processing images.
Reduce the transmission data.
"86: Error" The parameter in the control
code is incorrect.
Specify the correct parameter.
"92: Error"
(displayed in the error
history)
Printing is canceled from the
control panel.
To perform printing, operate the control
panel again.
"98: Error" Accessing the hard disk
failed.
Turn off the power of the machine, wait for
10 seconds or more after confirming that
the main power indicator is turned off, and
then turn on the power.
page 19 "Turning On and Off the Power"
When a Message Appears While Using the Printer Function
405
To Next Page
Loading...
