Ricoh Pro C5310S - Loading Paper into the A3;11 × 17 Tray Unit

• You can load paper even if Tray 1 is in use. It is okay to pull out the left half of the tray while Tray 1
is in use.
Loading Paper into the A3/11 × 17 Tray Unit
(mainly Europe and Asia)
If you attach the A3/11 × 17 tray unit to Tray 1, it will hold A3 paper only. If you want to print on A4
, B4 JIS , 11 × 17 , 8
1
/
2
× 14 , or 8
1
/
2
× 11 , contact your service representative.
(mainly North America)
A3/11 × 17 tray unit can hold 11 × 17 paper only. If you want to print on A3 , A4 , B4 JIS ,
8
1
/
2
× 14 , or 8
1
/
2
× 11 , contact your service representative.
• Check that the paper edges are aligned at the right side.
1. Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
D0CPIC1313
2. Square the paper and load it print side down.
Do not stack paper over the limit mark.
D0CMIC1314
8. Paper Specifications and Adding Paper
202