(5) Other Options
No. Option Description
1 A3/11 × 17 tray unit
You can load paper sizes up to A3 or 11 × 17 in Tray 1
using this unit. If you install the A3/11 × 17 tray unit on your
machine, you cannot use it as a tandem tray.
2 Copy connector Allows you to use the connect copy function.
3
Optional feed roller
unit
You can load coated paper in the paper tray.
4
Carbonless paper
unit
You can load carbonless paper in the two-tray wide LCT tray.
• The main unit's bypass tray cannot be used when the two-tray wide LCT is attached.
• You cannot install multiple finishers simultaneously.
• To use the twin interposer, Finisher SR5110 or Booklet Finisher SR5120 is required.
• To use the folding unit, Finisher SR5090, Booklet Finisher SR5100, Finisher SR5110, or Booklet
Finisher SR5120 is required.
• To use the interposer, Finisher SR5090 or Booklet Finisher SR5100 is required.
• To use the output jogger, Finisher SR5090 or Booklet Finisher SR5100 is required.
• You can install the high capacity stacker only if the decurl unit is installed. To prevent blocking, the
buffer pass unit is required.
Guide to Functions of the Machine’s Internal Options
• Fax unit
Allows you to use the facsimile function.
• Extra G3 interface unit
This lets you add a G3 fax line. A maximum of two G3 interface units can be installed.
Machine Options
35
To Next Page
Loading...
Need help?
General
