Turning On and Off the Power
To turn the machine on and off, press the main power switch on the left side of the machine.
• When you are using the fax function on the machine, do not turn the power off under normal
operation. If the power is turned off, data stored in the fax memory will be lost in about one hour
after the machine is turned off. If you have to turn the power off or unplug the power cord for some
reason, make sure 100% is shown as available memory on the screen for the fax function.
• Confirm how much power the options draw, and then plug them into an outlet that is nearby but
separate from the outlet that the main machine is plugged into.
Turning On the Main Power
• Do not press the main power switch soon after you press the main power of the machine. When
you turn the power on or off, wait at least 10 seconds after confirming that the main power
indicator on the control panel has turned on or off.
1. Make sure the power cord is firmly plugged into the wall outlet.
2. Open the cover of the main power switch on the left side of the machine, and push the
switch.
The main power indicator on the right side of the control panel turns on.
• When the power is turned on, the screen may show that the machine is performing an auto restart.
Do not turn off the main power while the machine is processing. It takes about 7 minutes until the
machine restarts.
• If a file was deleted from memory, a Power Failure report is automatically printed as soon as the
power is restored. This report can be used to identify lost files.
Turning On and Off the Power
19
To Next Page
Loading...
