Ricoh Pro C5310S - 0814: Punch Position: with Feed

Paper feed direction
Paper feed direction
2 Holes Top
2 Holes Left
CVK007
Setting Items
Default
Value
Max.
Value
Min.
Value
Step Unit
2 Holes Type JP / EU
3 Holes Type US
4 Holes Type EU
4 Holes Type NE
2 Holes Type US
0.0 2.0 -2.0 0.5 mm
0814: Punch Position: With Feed
Adjust the horizontal position of the punch holes when using Finisher SR5110 or Booklet Finisher
SR5120.
Press [ ] to move the position toward the top edge (left) relative to the paper feed direction, or [ ] to
move it toward the bottom edge (right).
Paper feed direction
Paper feed direction
2 Holes Top
2 Holes Left
CVK008
07: Finishing: Finisher
341