Ricoh Pro C5310S - Booklet Finisher SR5120 (Saddle Stitch)

Booklet Finisher SR5120 (Saddle Stitch)
• Pull out the booklet
staple unit.
• Pull out the cartridge
levers.
• Pull out the cartridge
gently.
• Hold both sides of the
cartridge, then raise
the upper unit.
• Remove the empty
refill in the direction of
the arrow.
• Push in the new cartridge
until it clicks.
• Gently push down the
upper unit until it
clicks.
• Hold the green lever
and push in the
cartridge.
• Until it clicks, then raise the lever.
• Return the staple unit to its original position.
• Close the finisher front cover.
D0CPIC1607
When a Staple Is Jammed
465