You can specify whether the Communication Failure Report is automatically printed using the User
Parameter (switch 04, bit 1) in the Fax Settings menu.
See "List of Parameter Settings", User Guide.
• The Pg(s) column gives the total number of pages. The Page Not Sent column gives the number of
pages that could not be sent successfully.
• "Unprogrammed" indicates that the document could not be sent because the forwarding
destination is not programmed.
• "--" indicates that the e-mail or Internet Fax document was sent to the mail server programmed in
this machine. (However, this does not mean the e-mail was delivered.)
3. Fax
124
To Next Page
Loading...
