• Job Type: Select [Normal Print] to execute printing immediately.
You can make a partial print as a test and proceed to print the rest of the document (Sample
Print).
See "Storing Documents in the Hard Disk Drive and Printing Them", User Guide.
You can store documents in the machine (Locked Print, Hold Print, or Stored Print).
See "Storing Documents in the Hard Disk Drive and Printing Them", User Guide.
• Document Size: Select the size of the document to print.
• Print On: Select the size of the paper to print on.
• Copies: Enter the print quantity.
• Orientation: Specify the orientation of the document. Select Portrait or Landscape.
• Input Tray: Select the tray loaded with the paper to use. When you select [Auto Tray Select], a
suitable paper tray is selected automatically according to the specified [Print On] and [Paper
Type].
• If you do not want to use particular trays when [Auto Tray Select] is specified, set the
machine so it does not automatically select those trays.
• To prevent the machine from selecting other trays automatically, disable auto tray
switching.
See "Tray/Paper Settings", User Guide.
• Paper Type: Select the type of paper to use.
• Color Mode: Select the print color.
You can print in universal color by using the following settings:
• [Image Quality] tab [Barrier-free Color Management:] [On]
Basic Procedure for Printing Documents
149
To Next Page
Loading...
