2. Place the aligned originals squarely face up in the Auto Document Feeder (ADF).
Place the originals with the first page facing up.
Fan sheets before loading so that multiple originals do not stick to each other and are not fed at
once.
Load the originals by placing them flush against the rear paper guide.
Do not stack the originals beyond the limit mark.
• To scan originals larger than B4 or 8
1
/
2
× 14 size, pull out the ADF’s extender on the original
output tray, and then raise the stopper.
Placing an Original in the Auto Document Feeder (ADF)
195
To Next Page
Loading...
