3. Select the name of the paper that you want to register.
Press [ Previous] or [ Next] to scroll through the list to find the paper that you want to select.
You can select two or more types of paper.
4. Press [Program to Custom Paper] [Yes] [Exit].
5. Press [Home] ( ) to close the [Tray Paper Settings] screen.
• You can check and change the settings of the registered custom paper such as the paper size
setting on the [Edit Custom Paper] screen. For details about modifying the custom paper, see
page 305 "Modifying a Custom Paper".
Registering a Paper Whose Paper Name Is Not Displayed in the Master Library
If the paper you want is not in the library's paper list or you don't know the name of the paper, use the
following procedures:
• Selecting the paper's type from the master library
The master library contains the optimum printing conditions not only for each commercially
available paper but also for each type of paper.
You can select the type of paper from the master library and register it as a custom paper even if
you don't know the name of the paper. The selectable paper types are as follows: Plain, Yellow,
Green, Blue, Ivory, Orange, Pink, Red, Gray, Letterhead, Label Paper, Translucent Paper,
Prepunched Paper, Transparency, Envelope, Coated: High Gloss, Coated: Matte, Coated: Glossy,
Textured Paper, Metallic/Pearl Paper, Clear File Folder, Synthetic Paper, Carbonless Paper. Each
type is divided into several categories according to weight.
• Manually specifying a paper's type and weight
You can register a custom paper by manually specifying its type and weight.
Selecting the paper's type from the master library
You can select the type of paper from the master library and register it as a custom paper.
Registering Custom Paper
295
To Next Page
Loading...
