Ricoh Pro C5310S - Page 299

9. Press [ Next].
10. As required, specify the paper thickness in units of µm.
The initial setting has not been specified. Specify your preferred setting.
1. Press [Change] for [Paper Thickness].
2. Press [On] [Change]
3. Enter the paper thickness using the number keys, and then press [ ].
4. Press [OK].
11. Press [Change] for [Paper Type].
12. Specify the paper type, and then press [OK].
Press [Change] if you changed the paper type.
13. Specify [Coated Paper Type], [Paper Color], [Prepunched or Not], [Textured or
Not], [Apply Duplex], and [Apply Auto Paper Select] according to the paper's
features.
If you change the [Coated Paper Type], [Paper Color], [Prepunched or Not], or [Textured or
Not] and press [OK], a message appears to notify you that the [Advanced Settings] will be
initialized. To apply the changes for those settings, select [Change]. To cancel the changes,
select [Do not Change].
14. Press [OK]
[Exit].
If the message "Some functions cannot be set at the same time. Check the settings." appears,
adjust the settings with the
icon.
15. Press [Home] (
) to close the [Tray Paper Settings] screen.
• If you want to use glossy paper, select [Glossy] for [Coated Paper Type]. If you want to use
matte paper (including silk, dull, and satin paper), select [Matte] for [Coated Paper Type].
• For details about custom paper settings, see page 306 "Custom Paper Settings".
• For details about [Advanced Settings], contact your machine administrator.
• When you specify Transparency as the paper type, select [Paper Weight 3] as the paper
weight.
Registering a New Custom Paper by Modifying an Existing Paper
You can open and modify the settings of a registered custom paper and register them as a new custom
paper.
This function is useful when registering paper that is the same type as an existing paper, but a different
size.
Depending on which settings you modify, details of a newly registered custom paper will be as follows:
Registering Custom Paper
297