6. Shortcut keys
You can register frequently used functions under [Customize Function] in the Settings menu.
See "Others (Copier / Document Server Settings)", User Guide.
7. Sort, Stack, Staple, and Punch functions
Displays settings that can be selected for sorting, stapling, and punching copies.
You can register frequently used staple functions and punch functions under [Finishing] in [Copier / Document
Server Settings].
8. Available functions
Press a function to display its menu. When you select a function, is displayed under the key.
9. Original and scanning settings
Use this area to specify the original type, image density level, and other settings.
10. [Reset]
Press to clear the current settings.
11. [ ] [Enter]
Press to confirm values entered or items specified.
12. [Sample Copy]
Press to make a single set of copies or prints to check print quality before making multiple sets.
See "Sample Copy", User Guide.
13. [Clear]
Press to delete a number entered.
14. [Start]
Press to start copying.
15. Number keys
Use to enter the numbers for copies and data for the selected function.
16. [Simplfied Scrn.]
Press to switch to the simple screen.
17. [Interrupt mode]
Press to make interrupt copies.
See "Interrupt Copy", User Guide.
18. [Recall/Program/Change Program]
Press to register frequently used settings, or to recall registered settings.
See "Registering Frequently Used Settings as a Program (Classic Applications)", User Guide.
• The estimated time to complete a copy job is displayed on the top of the screen.
How to Use the Copy (Classic) Screen
73
To Next Page
Loading...
