5. [Manual Entry]
To specify destinations not registered in the address book, press this key, and then enter the e-mail addresses
using the soft keyboard that appears.
6. [Recent]
Press this key to select destinations that have been recently specified using [Manual Entry]. If there are multiple
recent destinations, press [ ] or [ ] to scroll through them.
7. [Check Modes]
Allows you to confirm the scanning settings.
8. Destination field
The specified destination appears. If more than one destination has been specified, press [ ] or [ ] to scroll
through the destinations.
9. Destination list
The list of destinations registered in the machine appears. If all of the destinations cannot be displayed, press
[ ] or [ ] to switch the screen.
The ( ) symbol indicates a group destination.
The ( or ) symbol indicates a destination that can receive encrypted e-mail.
10. [Text], [Subject], [Security], [Sender Name], and [Recept. Notice]
Enter the message and specify the subject, security (encryption and a signature), sender, and whether or not
to use Message Disposition Notification.
11. [Select Stored File]
Allows you to send the documents stored in the Document Server.
12. [Send File Type / Name]
Press to specify settings such as file format and file name.
13. Original and scanning settings
Allows you to specify scan settings and original feed types.
14. [Reset]
Press to clear the current settings.
15. [ ] [Enter]
Press to confirm values entered or items specified.
16. [Clear]
Press to delete a number entered.
17. [Start]
Press to start scanning.
18. Number keys
Use to enter the numbers and data for the selected function.
19. [Simplfied Scrn.]
Press to switch to the simple screen.
How to Use the Scan (Classic) Screen
81
To Next Page
Loading...
