T
echnical
B
ulletin PAGE: 2/3
Model:
Aries-P1.5/C1.5, AG-P1/C1, AGL-P1/C1
Date:
06-Jun-12
No.:
RM077073
3. Insert one sheet of plain white paper in the paper path so that the front edge of the
paper aligns with the edge of the registration timing roller guide plate.
Use either of the following paper:
* Hammermill Fore MP White（20lb）LT
* Data Copy Everyday Printing（80g/㎡）A4
Note
Make sure that the paper covers the entire area beneath the CIS.
4. Install the new CIS unit, attach the cover, and push the right drawer back into the
machine.
Paper
Front edge of the paper
Edge of the guide plate
Shift roller
Registration timing roller
To Next Page
Loading...
