T
echnical
B
ulletin PAGE: 1/5
Reissued: 09-Nov-12
Model:
Aries-C1.5/P1.5, AG-C1/P1, AGL-C1/P1,
B-C3/C3.5/C4, DDP
Date:
11-May-06
No.:
RB234014o
RTB Reissue
The items in bold italics have been added.
Subject:
Controller firmware (Finisher)
Prepared by:
J. Ohno
From:
1st PP Tech Service Sect.,PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other (Firmware)
Action required
Service manual revision
Retrofit information
Tier 2
This RTB has been issued to announce the firmware release information for the Finisher.
Version Program No. Effective Date Availability of RFU
02.050:64 B8305102V December 2012 production Not available
02.040:63 B8305102T January 2012 production Not available
02.030:62 B8305102S March 2011 production Not available
2.000:61 B8305102R October 2010 production Not available
1.900:60 B8305102Q January 2010 production Not available
1.820:59 B8305102P Aug 2009 production Not available
1.800:58 B8305102N June 2009 production Not available
1.600 B8305102M March 2009 production Not available
1.500 B8305102L January 2009 production Not available
1.420:51 B8305102K August 2008 production Not available
1.400:50 B8305102J July 2008 production Not available
1.310:48 B8305102H May 2008 production Not available
1.160 B8305102G April 2007 production Not available
1.140 B8305102F November 2006 production Not available
1.100 B8305102E June 2006 production Not available
Note: Definition of Availability of RFU via @Remote
“Available”: The firmware can be updated via RFU or SD card.
“Not available”: The firmware can only be updated via SD card.
Version Modified Points or Symptom Corrected
02.050:64 Symptoms corrected:
Jogging performance of the shift tray is poor when printing A5 SEF.
02.040:63 Specification Changes:
A span of 250msec to withhold the OFF signal was newly prescribed as a
specification of the GBC Stream Punch.
02.030:62 Specification Change:
With the Booklet Maker BK5010, it enables saddle-stitch of custom size.
Currently, this function is available only when connected to CREO.
Symptoms Corrected:
・ The error occurs when making one booklet with the Boolket Maker BK5010.
・ The jam occurs when copy/print with switching the punch-hole type.
This occur when we use main machine(110cpm or 135 cpm)/SR5000 with
decurl unit.
To Next Page
Loading...
