Technical Bulletin PAGE: 1/1
Model: Aries-P1.5 Date: 19-Jul-13 No.: RM077096
Subject: New service part - BALL BEARING: REGISTRATION:
DRIVEN: FRONT
Prepared by: T. Miyamoto
From: 1st PP Tech Service Sec., PP Tech Service Dept.,
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety Other ( ) Tier 2
Change: The following part was added as an individual service part.
Reason: To prevent breakage of the ball bearing that supports the registration roller at the
front side of the machine
23. Paper Registration 8 (D095/M077)
New P/N Description Q’ty Int Page Index Note
M0777430
BALLBEARING:REGISTRATION:DRIVEN:
FRONT
1 - 71 1 Add
Note:
The newly registered ball bearing is only used for this location. Make sure to use the ball
bearing of the old type for all other locations.
p/n M0777430
BALL BEARING: REGISTRATION: DRIVEN: FRONT
To Next Page
Loading...
