Ricoh pro c901 - RTB 111: Glossy streaks

Technical Bulletin PAGE: 1/9
Model: Aries-P1.5/C1.5
Date: 18-Apr-14
No.: RM077111
Subject: Troubleshooting 3 types of glossy sreaks
Prepared by: Hiroaki H Matsui
From: PP Tech Service Dept., 1st PP Tech Service Sect.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier 2
SYMPTOM 1
Glossy streaks [A] appear along the paper feed direction in an area between 100mm from
the leading edge and 80mm from the trailing at an interval [B] which corresponds to the
fusing stripper plate [C].
[C]
・ ・ ・
Paper Feed Direction
100mm or greater
80mm or greater
[B]
[A]