Technical Bulletin PAGE: 15/15
Reissued:16-Oct-12
Model: Aries-C1.5 (D095) / Aries-P1/.5(M077) Date: 8-Nov-2012 No.: RM077077b
Procedure 3: Manual Toner Refreshing
While Procedures 1 and 2 are SP modifications to prevent problem occurrences, the
following is a troubleshooting procedure to resolve a problem that is present and
caused by toner degradation.
3-1. Do “No.208 Execute Toner Refreshing” in the Adjustment Settings for Skilled
Operators Menu so that old toner/developer are removed and do not clog the
doctor gap.
3-2. Run the customer job.
Are the results accepted by the customer?
Yes: Finish
No: Repeat the above step, because the development unit still contains
degraded toner.
3-3. Replace the developer of the affected color by referring to the procedures
described in RTB RM077072a, if mottled effects are still observed after
repeating the above steps twice.
To Next Page
Loading...
