Ricoh Scanner Scanner Guide

Various Scan Settings
112
6
G Check the value of Scan Area (X3) and [Auto Detect] are displayed, and then
press [OK].
To specify the length and width of an original
Use the following procedure to scan the entire area of an original by specifying
the width and length of the original under Original Size (X1 and Y1) and Scan
Size (X3 and Y3).
The following procedure is based on the example original shown below.
A Press [Scan Settings].
B Press [Scan Size].
ATF007S

Ricoh Scanner Specifications

General

Brand	Ricoh
Model	Scanner
Category	Scanner
Language	English