Ricoh SP 3710DN - Page 124

5.System Maintenance
112
Menu
Description
[1 to 90 / 30 / 1 sec/step]
HTTP Sen Timeout
Specifies the send timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
HTTP Rec Timeout
Specifies the receive timeout interval when calling the RCG.
[0 to 100 / 30 / 1 sec/step]
HTTP Retry Interval
If the HTTP connection fails, specify the interval at which the
connection will be retried again.[0 to 65535 / 3 / 1 sec/step]
HTTP Retry #
If the HTTP connection fails, specify the number of times to
retry the connection.
[0 to 255 / 3 / 3 counts/step]
HTTP Con Delay
Specifies the connection request sending delay.
[0 to 255 / 5 / 1 sec/step]
Max Multipart
Specifies the maximum number of multipart.
[0 to 10 / 10 / 1/step]
Rescue G/W URL
Displays the rescue URL.
Per Notice Mode
Sets the periodic notification mode.
[0 to 5 / 0 / 1/step]
Cnt Notice Mode
Sets the counter notification mode.
[0 to 5 / 0 / 1/step]
Per Notice Time
Displays the periodic notification date and time.
Cnt Notice Time
Displays the counter notification date and time.
Cnt End Time
Displays the counter closing date and time.
Next Per NotiTime
Displays the next periodic notification date and time.
Next Cnt NotiTime
Displays the next counter notification date and time.
Next Cnt End Time
Displays the next counter closing date and time.
Fix CntPol Time
Displays the center control polling date and time.
Test Flag
Sets the test flag.
[0 to 255 / 0 / 1/step]
Update Result
Displays the center information update results.
Mgn Expir Time
Specifies the margin to notify the proximity of the expiration
of the certification.
[2592000 to 15552000 / 2592000 / 1 sec/step]
NotiTime ExpTime
Displays the date and time to notify the proximity of the
expiration of the certification.
HTTP Proxy use
Determines if the proxy server is used when the machine
communicates with the service center.
HTTP Proxy Host
Inputs the address of the proxy server used for