3.Setting for PaaS (Only for CHN)
17
Unregistering PaaS
To unregister, it is necessary to follow the cancellation procedure on the PaaS server side in advance.
1. Launch the web browser.
2. In the web browser’s address bar, enter http://(machine’s IP address)/ to access the machine.
3. On the Web Image Monitor menu, select NPB Settings.
4. Check that Operation is set to "Contract Cancellation".
5. Click [OK].
6. If the message "Operation Successful" appears, PaaS unregistration is complete.
7. Set the [PaaS Validity Setting] to inactive.
Four-line LCD panel: SP menu > [CTL Maintenance] > [PaaS Validity Setting]
Touch panel: SP menu > [CTL SP] > [PaaS Validity Setting]
To Next Page
Loading...
