5.System Maintenance
157
For MF Touch Panel Models
1. Press the [Setting] icon on the [Home] screen.
2. Press [Printer Features].
3. Press [List/Test Print].
4. Press [Test Page].
The test page is printed.
Test Page Example
Test Pattern Printing
Follow the test pattern print procedure below to print a test pattern.
To Print the Test Pattern
For information on how to enter the "Maintenance Mode (SP mode)", contact the supervisor in your
branch office.
For Four-Line LCD Models
1. Enter the "Maintenance Mode (SP mode)".
2. Press the [ ] or [ ] key to select [Engine Maintenance], and then press the [OK] key.
3. Press the [ ] or [ ] key to select [Test Pattern], and then press the [OK] key.
The three test pattern pages are printed.