Ricoh SP 3710DN - Page 131

5.System Maintenance
119
Menu
Description
Transfer
Roller
Remain
Displays the remainder until the service life (Transfer roller: %)
Paper Feed
Roller
Remain
Displays the remainder until the service life (Paper feed roller: %)
Fusing Unit
Remain
Displays the remainder until the service life (Fusing unit: %)
Prt Cartridge
Info
Kind ID
Displays the toner cartridge (AIO) information (Kind ID).
Toner End
History
Displays the toner cartridge (AIO) information (Toner End History).
Refill Flag
Status
Displays the toner cartridge (AIO) information (Refill flag status).
Unit Print
Counter
Displays the toner cartridge (AIO) information (Unit Print Counter).
Motor Rotation Time
Displays the main motor rotation time.
Reset Paper Feed Rol Life
Clears the EM counter of the paper feed roller.
Waste Toner Disposal
Sets the machine operation at "waste toner full" of the refilled AIO.
[On or Off (Default)]
With the main motor rotation count feature, the machine can be set
to stop printing after the print total exceeds a certain set value. If the
print count exceeds this value, then "Replace Print Cartridge"
remains in the display. Then a new AIO cartridge must be installed.
This feature is a safety measure to prevent the used toner tank from
becoming full (there is no toner overflow detection mechanism).
Test Pattern
Prints the test pattern.
1200dpi LD Power
Adjusts print density (density levels by increasing the number)
[42 to 106 / 74 (Default) / 1 /step]
Refill mode setting
DFU
[Auto refill mode/ Pure refill mode]
OPC Life Info
OPC Rotation
Time
Displays the OPC life information (OPC rotation time).
Pre-OPC
Rotation Time
Displays the OPC life information (Pre-OPC rotation time)
OPC Alert
Status
Displays the OPC life information (Alert status)
OPC Pre-
Displays the OPC life information (Pre-Alert status)